Posts

Corrosion study of mild steel, tor steel and CRS steel by weight loss method

ABSTRACT: In present investigation an attempt has been made to investigate corrosion rate of mild steel, Tor steel and CRS steel in reinforced concrete. The five concrete block sites have been selected. The factor causing corrosion and conditions of the environment has been studied. Attempt has been made to consider conditions which will help to get greater protection against corrosion problem for industries as well as household articles.   Introduction :   Corrosion is the destructive attack on a metal or a metal alloy by chemical or electrochemical reaction with its environment . Metal and its alloys tend themselves to many engineering application because of their combination of lightness with strength, thermal and electrochemical conductivity, reflectivity and non toxic qualities . Iron is used in the form of stainless steel for making cutlery, hospital and food service equipment. Carbon steel is the most common, cheapest and most versatile metal used in indu...

Synthesis and bioassay studies of 7-substituted pyrido[2,3-d]pyrimidines

ABSTRACT: 4-Aminopyrimidine-5-carbaldehyde 1 underwent facile condensation with various aromatic ketone derivatives in the presence of K2CO3 and small catalytic amount of KI in acetone was afforded corresponding 7-Substituted pyrido[2,3-d]pyrimidine derivatives 3a-j. Their chemical structures were characterized using IR, H1 NMR and Mass spectral studies. All the above compounds were screened for anti-microbial activity, anti-oxidant activity and their bioassay showed them to possess significant antimicrobial activity and anti-oxidant activity. Introduction :   For small organic molecules, simple nitrogen-containing heterocycles receive a large amount of attention in the literature, of these heterocycles, the synthesis, reactions and biological activities of pyridine containing molecules stands as an ever expanding area of research in hetero aromatic chemistry. pyrido[2,3-d]pyrimidine heterocycles have received much less attention in the literature, in spite of their ...

Formulation and in-vitro evaluation of floating capsules of Loratadine

ABSTRACT: The present work focuses on the development of hydrodynamically balanced delivery system of loratadine as a single unit floating capsules. Sustained release floating capsules for loratadine were fabricated using drug:polymer ratio of 1:4. The hydrocolloids were used in different proportions using 32 full factorial design and formulations were prepared. These formulations were optimized on the basis of buoyancy, matrix integrity, duration of floating and in vitro drug release. All the nine formulations showed good buoyancy and matrix integrity. The duration of floating was more than 12 h for all formulations. In vitro drug release study of these formulations indicated controlled release of loratadine and about 90 percent drug was released at the end of 12 h. Further details @ http://www.jocpr.com/ For more details @ http://www.jocpr.com/articles/formulation-and-invitro-evaluation-of-floating-capsules-ofloratadine.pdf

UV-spectrophotometric method development and validation for estimation of Galantamine Hydrobromide in tablet dosage form

ABSTRACT: Two innovative, new, simple and low cost UV-spectrophotometric and first order derivative methods were developed and validated for estimation of Galantamine Hydrobromide in bulk drug and tablet dosage form. Galantamine Hydrobromide was estimated at 289 nm in Distilled Water. In first order derivative, it showed amplitude at 284.8 nm and λminima = 290.4 nm with 286.4 nm as zero crossing point (ZCP). In both the methods linearity was found to be in the range of 20-100 µg/ml; for UV spectrophotometric method (y = 0.007x - 0.002, r² = 0.999) and for first order derivative spectrophotometric method (Y=0.0012 x+0.00045; r2=0.999), respectively. These methods were analyzed and validated for various validation parameters according to USP guidelines. The quantitation limits were found to be 0.50 and 1.54 µg/ml, for UV-Spectrophotometric method and 3.3 and 10 µg/ml for the 1st order derivative method. The proposed methods were successfully applied for the determination of Galant...

Novel Approaches in Erythropoietin

ABSTRACT: Erythropoietin, or EPO, is a glycoprotein hormone that controls erythropoiesis, or red blood cell production. It is a cytokine for erythrocyte (red blood cell) precursors in the bone marrow. Also called hematopoietin or hemopoietin, it is produced by the peritubular capillary endothelial cells in the kidney, and is the hormone that regulates red blood cell production. The existence of a hormone that controls RBC production was first suggested by the experiments of Paul Carnot in 1906, who created anemic rabbits and then transfused their serum into recipient rabbits. EPO is produced by peritubular cells in the adult kidney, and in hepatocytes in the fetus. In adults, a small amount is also produced by the liver. The rate of Epo synthesis and secretion depends on local oxygen concentrations; hypoxia is the main stimulus for Epo production. Although the use of erythropoietin has been studied in critically ill patients, erythropoietin has not been shown to be effective in ...

Wound-healing activity of Hydroxytriazenes–A new class of Bioactive compounds

ABSTRACT: In the present study, the wound-healing activity of some substituted hydroxytriazenes was investigated. Excision, resutured incision and dead space wound models were used to evaluate the wound-healing activity of substituted hydroxytriazenes. In excision wound model, treatment was continued till the complete healing of the wound, in incision and dead space wound models the treatment was continued for 10 days. For topical application, 5% w/w ointment of hydroxytriazenes was prepared in 2% sodium alginate and for oral administration hydroxytriazenes dissolved in DMSO, at dose 5 mg/kg were used. In excision and incision wound models, the control group of animals was left untreated and in dead space wound models the animals were treated with DMSO (1ml/kg). The healing of the wound was assessed by the rate of wound contraction, period of epithelialisation, skin breaking strength, granulation strength, dry granulation tissue weight and hydroxyproline estimation. Except the p...

Method development and validation of RP-HPLC method for simultaneous determination of Lamivudine and Zidovudine

ABSTRACT: A rapid, sensitive and specific RP-HPLC [1-5] method involving UV detection was developed and validated for determination and quantification of Lamivudine and Zidovudine. Chromatography was carried out on a pre-packed AltimaC18 5µ (150*4.6mm) column using filtered and degassed mixture of Ammonium acetate buffer:Methanol (80:20) as mobile phase at a flow rate of 1.0ml/min and effluent was monitored at 270nm. The method was validated in terms of linearity, precision, accuracy, and specificity, limit of quantification and limit of detection. The assay was linear over the concentration range of Lamivudine and Zidovudine was 37.5mcg-112.5mcg/ml and 75mcg to 225mcg/ml respectively. Accuracy of the method was determined through recovery studies by adding known quantities of standard drug to the pre analyzed test solution and was found to be 98.50%-99.9% and 98.30%- 100.10% within precision RSD of 0.71 and 0.82 for Lamivudine and Zidovudine respectively. The system suitability...